Edge CTS Mounting

[Chapman_4]

I was wondering if anybody had they edge insight mounted here or if you had any other unique spots for them. I have a pillar mount with mechinacal gauges already in it so my old dash pod won't work. Thanks in advance for any opinions or options.

 

[TROJAN366]

I have mine right there. Just cut a small hole in the back of the cubby to feed the wire through and run it under the dash to the obd2. Edge insight cs fits perfect. its just pressed in.

 

[Chapman_4]

How big a hole did u have to cut? Seems like it would have to be a pretty good size.

 

[JDub]

Purchase their new universal 2 1/16" gauge pod mount and mount it off the pillar you already have...

http://www.edgeproducts.com/product.php?pk=171&pvk=510

 

[TROJAN366]

I put mine down low because I hate having all that light up on the pillar. Creates a distraction at night.

And as far as the holegoes, it isn't huge but it needed to be big enough to pull the connection to the back of the cs through. If I remember correctly it is the entire height and maybe a little less than 2 inches cut in from the corner

Edit: I made 3 cuts so I didnt have a piece to put back in. But if you did it right you could cut a big hole. Pull the wire through then tuck and glue the piece back in and notch a small slot for the wire.

 

[Fasttoys450]

I put mine up top easy for me to see

 

[TROJAN366]

With the boost and egt on the pillar I don't look down at mine much. More used to switch tunes.

 

[hondarider552]

Im still using the supplied suction cup mount for the windshield...

 

[TROJAN366]

I just noticed you said CTS. Mine is a CS. your won't fit where mine is without having it hang out.

 

[Chapman_4]

I just noticed you said CTS. Mine is a CS. your won't fit where mine is without having it hang out.

Yeah I seen that but I thought about using the top hole since there is a little lip there and using some velcro on the bottom of it

 

[TROJAN366]

I think that'd work prett well for you. A bit easier to see it there as well.

 

[Chapman_4]

anybody else?

 

[Blackhawk878]

Here's mine, similar to Fasttoy's but inside the console.

 

[glock36]

^^^ makes me wish I had a overheard console in my LML. That looks like it was made for the CTS

Sent from my Desire HD using Tapatalk 2

 

[MAXX IT OUT]

I put mine up top easy for me to seeView attachment 25769

I am trying to mount mine, and I like how you did yours. Could you post some more picture on how you did yours?