ECM pins

[vortecfcar]

Just got off the phone with Pat, looking for ECM pins.

Here's the info I've spent the last 3 hours looking for.

LLY- (pn-15356827)http://connectors.delphi.com/DCSGDMCS/DCS/Catalog/PartDetail.aspx?PartNumber=15356827

LB7- pn(12084912)

http://connectors.delphi.com/DCSGDMCS/DCS/Catalog/PartDetail.aspx?PartNumber=12084912

Enjoy,

Nick

 

[duramaxin14]

Are u trying to wire up a dsp2 or 5 if so u pull the ecm connecter out and u open the end of it. There will be numbers in there i beilve its pin 32 and 50. 32 will be right by a pink wire i beilve and my 32 50 slot was taking so i put it in 51 and it worked

 

[vortecfcar]

Those are the part numbers for the actual pins that you crimp on the end of the wires and plug into the ecm. I need them because I'm building some DSP5 switches.

I think I'll ask Pat do the testing on them, they're probably good for 6 or 7 rwhp over a DSP2


Joking




Nick

 

[McRat]

Thanks!

If everyone posts P/N's when they find them for various goodies, it makes everyone's life easier.

 

[Ben46a]

Apparently these numbers are no good anymore.. any updated ones?

 

[Fingers]

Mouser is a Delphi distributor.

http://www.mouser.com/Search/Refine.aspx?Keyword=829-15356827

and

http://www.mouser.com/Search/Refine.aspx?Keyword=829-12084912

FWIW you can search any Delphi part number by prefixing it with "829-" on Mouser's web site. Mouser is always happy to send out the tiny quantities too.

 

[MMLMM]

I thought there was 2 sizes for the LB7???

 

[Fingers]

Only need the one size for the DSP switch.

 

[MMLMM]

Only need the one size for the DSP switch.

hmmmm.....I'm missing something then.....

This is for my bench harness but same situation really.