dtc limp wont stop help

[Raptorgabe]

my truck threw a p0848 , p0700 and a p0741 which are a fluid pressure selanoid and a torgue converter selanoid shut off havnt had no problems in a while and seems like it was getting hotter than normal today also any ideas what it could be And also when i push the gas it is like jumping it is a 2003 lb7

 

[AubleAK]

possibly an electric problem. might have some broken wires on your trans harness. Fill in your signature so the guys can help you trouble shoot the problem.

 

[Raptorgabe]

Where is the trans harness at so I can check it out

 

[Raptorgabe]

do you guys think changing te oil would help any

 

[TeaBagger2006]

pull your trans pan and check for abnormalities

 

[Raptorgabe]

well i changed the oil and when i took the pan off the filter was sitting in the pan im not sure if it fell off when i took it off or if it was off becasue now its not doing it anymore

 

[Raptorgabe]

alkso i checked the tco harness and about 3 of the ports on the harness were like coroted so i got some of that electrical grease and put in there also

 

[06 Dually]

06 dually

I have the same issue. Parked for 2 mos. now its in limp mode. Shift Range Inhibated. Removed TCM and checked harness in engine compartment. Any Ideas would be great. Throwing the same codes as well.

 

[jc1843]

Loose filter seems to be more common with the 6 speed-- might pull the pan and check. They do make a filter lock for the stock filter-- check with SunCoast, or MikeL.