LBZ: DSP5- different idle depending on switch position?

[Cornell]

Is there a way I can have the LB7 rumble idle at one switch position and just the stock hiss idle at another position? Sometimes I sit and idle for longer periods of time and the "stock" hiss idle quiets the exhaust down in the cab quite a bit.

Minimum target vane position table (B2225) in the base tune? What else would I have to change in the base tune? B2010-B2015?

 

[DmaxHawk]

Pretty easy. Just adjust the the turbo vane position tables to 99% from 600-800 rpm and 0-15 mm3 on the tune you want to hiss and say 2% on the "rumble" tune.

A901,2,3 on the DSP files. Make sure the max and min tables on your base tune are set to handle 2 and 99 also.

 

[LarryJewell]

Pretty easy. Just adjust the the turbo vane position tables to 99% from 600-800 rpm and 0-15 mm3 on the tune you want to hiss and say 2% on the "rumble" tune.

A901,2,3 on the DSP files. Make sure the max and min tables on your base tune are set to handle 2 and 99 also.

:yup: 88% from 600-800 rpms and 0 - 30 mm3 for hiss and 20% from 600-800 rpms and 0-30 mm3

 

[Cornell]

:hug:

 

[MMLMM]

what Larry said, but I like 90% for the hiss and 15% for the rumble