DPC '13 Thread

[i_keyser]

Why did they back out?

i dont think they got the truck finished in time.

 

[CustomAutoLLC]

Shilo and Dmitri had the truck together Saturday morning, but we battled a pressure issue until almost Sunday. When we got that out of the way we lost an injection pump (of corse the one in the valley) Dmitri and Shilo work 24/7 to fix it and got it done, but we have ran out of time to get Shilo there! We are sorry to have to back out, and to let people down. It is not often we don't make an event, but we hope to have Shilo at many other events this year! We want to thank all the guys at Industrial for their help and letting us crash their shop while we tried to make DPC! We wish are the competitors good luck!

 

[03badmaxxx]

This is the truck Kenneth Donkersgoed is on the crew for too right? Nice looking caravan of trucks last night from the pictures on facecock. Good luck to you guys.

Kenneth is the man! He drove over 4 hours to bring Dallas and i 2 spare tires while we were stuck on the side of the rode in Wyoming. Never met him previous to him doing that for us. I has enough service in BFE to squeeze out a FaceBook post saying we were stranded and he came to the rescue. Can't say enough good things about him

 

[DURAMXD]

Kenneth is the man! He drove over 4 hours to bring Dallas and i 2 spare tires while we were stuck on the side of the rode in Wyoming. Never met him previous to him doing that for us. I has enough service in BFE to squeeze out a FaceBook post saying we were stranded and he came to the rescue. Can't say enough good things about him

Yeah, I met him at the EFILive class at AADP, nice guy. Crazy bastard drove from WY to FL for the class in his welding truck, then had you guys put a tranny it, then drove home. :rofl:

 

[dirty_max]

so did we ever figure out who is replacing shilo?

 

[delong_1]

no replacement

 

[delong_1]

results so far

Beech 6.4L Powerstroke-687.9hp 1397.7ftlb
Rizzi Duramax-919.8hp 1465.4ftlb
(Out)-CADP
Cato Dodge Cummins-563.2hp 1086.7ftlb Blew rear freeze plug
Woosley Dodge Cummins-1255hp 2063ft/lbs
Hillison Dodge Cummins-1009.8/1885.7
Heafner 7.3L Powerstroke-
Lewis Duramax-
Doyle 6.7L Powerstroke-
Clausen 6.4L Powerstroke (Reigning Champ)-

 

[Alliance1289]

^ where you at?

 

[Duramax5]

sub'd

 

[delong_1]

Beech 6.4L Powerstroke-687.9hp 1397.7ftlb
Rizzi Duramax-919.8hp 1465.4ftlb
(Out)-CADP
Cato Dodge Cummins-563.2hp 1086.7ftlb Blew rear freeze plug
Woosley Dodge Cummins-1255hp 2063ft/lbs
Hillison Dodge Cummins-1009.8/1885.7
Heafner 7.3L Powerstroke-642.6hp/1350.9ftlbs
Lewis Duramax-
Doyle 6.7L Powerstroke-
Clausen 6.4L Powerstroke (Reigning Champ)-

 

[DIESELMAFIAPER.LB7]

6.4 only doing 687? He forget to fill his nos bottle :rofl:

 

[delong_1]

6.4 only doing 687? He forget to fill his nos bottle :rofl:

That was on spray. All numbers uncorrected.

 

[delong_1]

Beech 6.4L*Powerstroke-687.9hp 1397.7ftlb
Rizzi*Duramax-919.8hp 1465.4ftlb
(Out)-CADP
Cato*Dodge Cummins-859hp 1693ftlb
Woosley*Dodge Cummins-1255hp 2063ft/lbs
Hillison*Dodge Cummins-1009.8/1885.7
Heafner*7.3L Powerstroke-642.6hp/1350.9ftlbs
Lewis*Duramax-814hp/1423.8ftlbs
Doyle*6.7L Powerstroke-744.2hp/1411.9ftlbs
Clausen*6.4L Powerstroke (Reigning Champ)-1086hp/1926 ftlbs

 

[whitetrash21]

I take it Cato got the freeze plug blocked and got another pass????

 

[dirty_max]

not looking good for team duramax

 

[dbev24]

Wasn't beech's 6.4 estimated around 900 in diesel power mag? They were way off lol

 

[CustomAutoLLC]

Sorry we let the Dmax's down!!

 

[Alliance1289]

I take it Cato got the freeze plug blocked and got another pass????

True. He ended up getting it fixes and made another 2 passes after Clausen went. I forget the numbers though. Wanna say 8 something??? His nitrous backfire definitely rung my bell.

 

[LWATSON]

Sorry we let the Dmax's down!!

Sounds like you guys put forth a good effort:hug:

 

[juddski88]

I'd still bet on Tony rizzi being top 3. Sounds like it'll be an intense day at the track again!:thumb: