Last edited:
diy s366 intake
- Thread starter RENODMAX
- Start date
Man that looks awesomeAll you need is a rubber 90 off the turbo and a 45 degree 4" bend a 4" filter and some 1" bar stock in whatever thickness you have lying around. I got a 45 with one end that was 4" ID so I could have a slip joint and not worry about sugar from being MIG welded. Maf flange is 3/8" thick that I ground a radius in by hand. I coated mine in raptor liner and iats are no different than with a plastic s&b intake system but spool is better.
Very Nice. Sorry I didn't get to talk the other day. Was trying desperatly to finish a couple of trucks before we left for Ohio. I will give you a shout this week.
:thumb:
:thumb:
Hey man im trying to build one of these for my lbz and im having a hell of a time finding all the parts, i see you bought your pipe from summit, you got a number or something i can get so i can call and order the stuff? thanks alot man
Also you can check out racepartsolutions.com they will have everything you need....
http://intakehoses.com/Merchant2/merchant.mvc?Screen=CTGY&Category_Code=9DEH
http://m.summitracing.com/parts/WLK-42246
Just be sure to grind the aluminized crap off. Clean the inside of the pipe well too.
http://m.summitracing.com/parts/WLK-42246
Just be sure to grind the aluminized crap off. Clean the inside of the pipe well too.
You guys that have 366's can build this no problem! That's why I did the DIY. Even if you aren't a great fabricator (lord knows I'm not) you can put this together and make it look really nice. Plus using the slip joint on the weld you don't have to worry about it being MIG welded.