Hi peeps. New to Chevy and this forum. Hope I’m posting in the right place .
Just picked up a 2018 2500 High Country w/ 56k. Steering is very loose only at speeds of 55-75mph. Dealer replaced Pitman/Idler Arms but it didn’t fix the issue. Now they are saying that the truck drives fine and will not move forward with any other repairs lol.
After doing some internet research, I found that some people having this issue claim that it’s bad tuning/programming in the “Digital Assist Steering” module. I haven’t seen anyone speak of a solution.
Is it possible to re-tune or re-calibrate the system? Or replace all together?
Sent from my iPhone using Tapatalk
Just picked up a 2018 2500 High Country w/ 56k. Steering is very loose only at speeds of 55-75mph. Dealer replaced Pitman/Idler Arms but it didn’t fix the issue. Now they are saying that the truck drives fine and will not move forward with any other repairs lol.
After doing some internet research, I found that some people having this issue claim that it’s bad tuning/programming in the “Digital Assist Steering” module. I haven’t seen anyone speak of a solution.
Is it possible to re-tune or re-calibrate the system? Or replace all together?
Sent from my iPhone using Tapatalk