"Diesels in Dark Corners" Nov. 13, White Plains, GA

[towboattrash34]

I figured I better get on here and spy on what yall got cooking up for DIDC.




I got a extra one you can borrow, its not adjustable though.

Ok thanks. I'll check the height on my hitch stock height no traction bars just airbags and front spring clamps.

 

[towboattrash34]

What kind of tire pressure should be used to pull ?? And also I think I read put it in 3rd 4L th on right ???

 

[S Phinney]

All the reg. Duramax frontend renforcements, and some traction bars since it is a tall lift, and a 3in eyelet loop reciever hitch. Hope you can make it!

A military pintle hook?

 

[ryanihw350]

Ok thanks. I'll check the height on my hitch stock height no traction bars just airbags and front spring clamps.

you should be ok on the hitch height, rules are 26in to the top of the hooking point.

you mean spring clamps for the rear? front is IFS

 

[ryanihw350]

A military pintle hook?

Yeah a military pinatle hitch should be good we have a smaller hook on our chain. If not we will get you something, there should be a spare hitch on the sled in case someones don't work.

 

[ryanihw350]

What kind of tire pressure should be used to pull ?? And also I think I read put it in 3rd 4L th on right ???

Everyone runs something different, but you want around 60lbs on the rear to keep your tires from squating and the hitch height up. I run 18-20lbs in the front tires. we do have an air compressor to pump your tires back up if you air them down.

I would do Drive 4L, let the computer decide how many gears it needs to shift, but I have never pulled a duramax. But 3rd sounds right.

 

[dmax06]

i would like an administrator to remove ryanihw350 (my cousin) from the DURAMAX forum. He is a cummins man and this is a disgrace to the website to allow such trash to post on here!!! :rofl: :hug:

 

[TNRGreene]

i would like an administrator to remove ryanihw350 (my cousin) from the DURAMAX forum. He is a cummins man and this is a disgrace to the website to allow such trash to post on here!!! :rofl: :hug:

Are you saying like maybe a timeout?

 

[ryanihw350]

Are you saying like maybe a timeout?

Ha Ha, just trying to help yalls fellow people out:angel:! I haven't started stirring the pot yet!

 

[duramaxxin73]

Its getting closer!!!!!!!

 

[GeorgiaDuramax]

Any luck Travis?

 

[dmax06]

Its getting closer!!!!!!!

We are getting ready down here! everything still look good up yals way?

 

[duramaxxin73]

We are getting ready down here! everything still look good up yals way?

Yep were going to call and book our room today:thumb: So we'll be down for sure

 

[GeorgiaDuramax]

Is there gonna be boiled peanuts?

 

[HogAssWild]

Im goin :thumb:

 

[duramaxxin73]

We all need to get together down there and have a beer or two:angel:

 

[ryanihw350]

Is there gonna be boiled peanuts?

Should Be, I think Rock is suppose to be there with the Boiled Peanuts. Ill find out:thumb:

 

[bullfrogjohnson]

Any luck Travis?

Not looking good on my end. Front end is still not fixed and I believe my motor is finally tired from the years of abuse she's been through

 

[dmax06]

well i hate to hear that man. I hope you can work something out. However, its hard to be dissapointed on the motor issue. That thing should be in a museum somewhere!

 

[TNRGreene]

I believe my motor is finally tired from the years of abuse she's been through

Same here, no complaints though. Mines been beat also