Data Logging Race Truck

[coker6365]

What are you guys using for data logging on the bigger builds? We are looking at trying a CTS2 and adding some 200psi sensors to monitor drive/boost pressures. I am not sure what the data collection rate is though.

Sent from my SM-G930V using Tapatalk

 

[Ne-max]

V2 and go pro on mechanical gauges

 

[Chevy1925]

V2 and/or gauges with recall feature. We are about to do a full aftermarket datalogger setup on the race cummins but its to monitor EGT on every cylinder and ALL the vitals of the engine/turbos/trans/etc. its not budget friendly by any means... going to install that after world finals.

 

[bcdeutsch731]

I haven't herd to many good things about the CTS data logging.
You're going to have to spend some $$ to get something good.

RacePak
or
Bosch standalone

 

[coker6365]

Recording the gauges is decent, but stings when the gauges are pegged out. :roflmao:

I looked at some of the RacePak stuff. Looks like good stuff but man is it pricey! lol The V2 does a good job on most aspects, but I would like to log the correlation between Boost, Drive Pressure, EGT, etc.

What data logger are yall going to run James?

 

[Chevy1925]

Recording the gauges is decent, but stings when the gauges are pegged out. :roflmao:

I looked at some of the RacePak stuff. Looks like good stuff but man is it pricey! lol The V2 does a good job on most aspects, but I would like to log the correlation between Boost, Drive Pressure, EGT, etc.

What data logger are yall going to run James?

ill have to look up the name again. it is 6k for everything we need

 

[coker6365]

ill have to look up the name again. it is 6k for everything we need

LOL, well you just ruined my day unless that's 6k dollhairs... :rofl:

 

[Chevy1925]

LOL, well you just ruined my day unless that's 6k dollhairs... :rofl:

ha! i wish that was the case!

 

[ikeG]

Cheapest Bosch standalone would be 10-11k with the dataloger. No way to control the Allison with it either. Friend of ours is having good luck with the cts2 as far as dp vs boost and everything else.

Sent from my XT1585 using Tapatalk

 

[slipclutchms]

Does fleece still make the v2 data logger interface thing ?

 

[coker6365]

Does fleece still make the v2 data logger interface thing ?

I spoke to Scott at Fleece last week. They are discontinued and only done on a case by case basis at this time. Trying to see what we can do to give one a shot.

Sent from my SM-G930V using Tapatalk

 

[diesel-max]

PCS

Its what I use in my pulling truck along with my v2 and normal logging.


https://www.powertraincontrolsoluti...ftermarket/Products/Displays/D200_Dashlogger/

 

[coker6365]

PCS

Its what I use in my pulling truck along with my v2 and normal logging.


https://www.powertraincontrolsoluti...ftermarket/Products/Displays/D200_Dashlogger/

That actually looks very reasonably priced too. Thanks!

Sent from my SM-G930V using Tapatalk