Dana 60 alingment question

[bittles313]

Hello,just finished installing full hydraulic steering on a friends pulling truck.It is the PSC double ended kit so there is adjustment at both wheels.The truck is an 86 chevy big block,dana 60 front runs 33.5 tall tires and hangs 800lbs on front.Wondering what you guys would suggest for setting of toe,I have heard toe in and toe out.Thanks in advance for advice.......

 

[smkndmax05]

When I did my SAS conversion I set the toe with a tape measure then took it to an alignment shop. Outside of the tire to outside of the tire

 

[rgullett83]

My opinion is zero toe to no more than 1/4" toe out. Its gonna want to toe in when pulling. The d60 we have in the puller is about 1/8" toe out, and it seems to be working well so far

Sent from my MK16a using Tapatalk 2

 

[Chevy1925]

My opinion is zero toe to no more than 1/4" toe out. Its gonna want to toe in when pulling. The d60 we have in the puller is about 1/8" toe out, and it seems to be working well so far

Sent from my MK16a using Tapatalk 2

x2

 

[Sledheadxp800r]

X3

 

[bittles313]

Thanks alot guys 1/8 toe out will be where it gets set then...