Cp3 where to buy?

[THEFERMANATOR]

Where is the best place to get a stock LBZ or LMM CP3? The CP3 in my BURB is getting weak and can barely hold 160MPA with a 20% over tune whereas I used to be able to hold 170 with a 40% over tune. It's just been slowly getting weaker and I've already replaced the regulator due to idle surge and it has a lift pump as well. I figured I might as well upgrade to a LBZ or LMM pump and regulator to get a little extra bump in pump capacity. I won't be doing this for a little while, but figured I would start shopping now.

 

[paint94979]

Where is the best place to get a stock LBZ or LMM CP3? The CP3 in my BURB is getting weak and can barely hold 160MPA with a 20% over tune whereas I used to be able to hold 170 with a 40% over tune. It's just been slowly getting weaker and I've already replaced the regulator due to idle surge and it has a lift pump as well. I figured I might as well upgrade to a LBZ or LMM pump and regulator to get a little extra bump in pump capacity. I won't be doing this for a little while, but figured I would start shopping now.

Henry can get you a great prices on CP3's:thumb:

 

[THEFERMANATOR]

Henry can get you a great prices on CP3's:thumb:

What is his screen name here?

 

[Lb7KID]

ripmf666 :thumb:

 

[JoshH]

Are you looking for new or used?

 

[Tony Burkhard]

http://www.duramaxdiesels.com/forum/showthread.php?t=21975

 

[x MadMAX DIESEL]

Non supporting vendor

:witch: edit

 

[68skylark455]

Dan@PPE gave me a good deal on an LBZ.

 

[THEFERMANATOR]

Was looking for a new one. It would figure that after I did the regulator the CP3 would start to get weak.