Comp Cam

[kmax05]

Installed a comp cam in my dmax, cam card says to set valve @.10 int/exh, I see all stock seem to be .12 or what is best?

 

[jmaz268]

I would set it for what the cam recommends.

 

[kmax05]

That's what i'll do, just wanted to double ck.:thumb:

 

[TheBac]

Did you add springs, too? If so, which ones?

 

[kmax05]

Did you add springs, too? If so, which ones?

Yes hamilton springs and stock pushrods.

 

[sweetdiesel]

.012 on exh and the lowest i would go is .10 on intake.

I go 11 and 12

 

[kmax05]

I set them 10/10 but its loud, alot of valvetrain noise, i'll reset them @ 11/12 and try that.

 

[blk smoke lb7]

I thought .10 was to tight and 12 was the sweet spot but what do it know lol

 

[emiller3]

Mine are set at 10in and 12exh but do 12&12 on most.

 

[kmax05]

Mine are set at 10in and 12exh but do 12&12 on most.

So i'll try that, despite what the cam card says.