Cognito lift install

DieselDummy

DieselDummy

Dirt Dummy
Oct 13, 2011
238
0
16
NY
Has anybody ever put a 4" lift in a cc, just wonder if any cutting is involved to put it in. Mine may be coming out just wondering anything has to be put/welded back in.

Thanks
 
clrussell

clrussell

pro-procrastinator
Sep 23, 2013
5,928
399
83
Pretty sure you have to cut the diff bracket off the frame and the mount off the front diff
 
Hernpj01

Hernpj01

On a Time Out
Sep 23, 2014
403
0
0
Indiana
clrussell is correct, you have to reweld the piece cut off back on for the diff bracket i have took two lifts off and it is nice if you can just find someone who wants your lift and swap them everything. That what we did both times
 
DieselDummy

DieselDummy

Dirt Dummy
Oct 13, 2011
238
0
16
NY
Yeah that's what I got, buddy wants it, I knew something was cut off, but also heard some lifts are designed to not cut that piece off.


Sent from my iPad using Tapatalk
 
Dozerboy

Dozerboy

Well-known member
Jun 23, 2009
4,892
470
83
TX of course
IIRC Congnito also sells a bolt version of that bracket to replace it if you cut it off. That is if you wheren't/didn't want to swap.
 
RPM Motorsports

RPM Motorsports

smokinum
May 13, 2008
3,271
10
38
Central Valley Ca.
Save the piece of the xmember you cut out and it can be welded back in if you want to return to stock. The driver side gets cut, the pass side gets un bolted. Like said above, one mount on the diff also gets cut off and Cognito sells a bracket to go back to stock. A full Cognito install will take you 8-13hrs depending on how your setup. There is a place that sells the cutoff xmember too, incase you loose it ;)
 
You must log in or register to reply here.
Top Bottom