clutches in ppe kits

onebaddmaxxx

Active member
Feb 22, 2009
1,212
1
38
Cecil County Md
Does anyone know what kind of clutches are used in ppe stage 6 kits? I see the stage 4 and 5 run alto reds and koleens. All I get out of ppe is that the stage 6 is "proprietary altos" just wondering if any one knew what they were exactly or had feedback.
 

Mike L.

Got Sheep?
Staff member
Vendor/Sponsor
Aug 12, 2006
15,681
232
63
Fullerton CA
Does anyone know what kind of clutches are used in ppe stage 6 kits? I see the stage 4 and 5 run alto reds and koleens. All I get out of ppe is that the stage 6 is "proprietary altos" just wondering if any one knew what they were exactly or had feedback.

I do. I tested them. They are outdated now.
 

onebaddmaxxx

Active member
Feb 22, 2009
1,212
1
38
Cecil County Md
Are they worth a damn? Do they have any issues? Any better than the altos in the stage 5s or no?

I know lately a lot of clutches have came out can't seem to follow them all lol
 

gtmax

New member
Apr 9, 2008
54
0
0
NFG--Alto reds are better than these. I personally prefer the Suncoast exclusive Raybestos waffle pattern C3/4s, Raybestos GPZ C2s and either there latest version C1s, or the tried and proven Alto C1s.

Mike and Andrew, working on my post count.:roflmao:
 

onebaddmaxxx

Active member
Feb 22, 2009
1,212
1
38
Cecil County Md
I assume the trans does not care what kind of clutches are in each pack as long as they are set up properly? Like if you ran the 16 single sided alto c1s, 7 gpz in the c2, and so on...?

If that's the case, what are the best c3/c4 clutch options?
 

03badmaxxx

Ghost Element
Mar 1, 2012
825
0
0
Mesa,AZ
www.facebook.com
NFG--Alto reds are better than these. I personally prefer the Suncoast exclusive Raybestos waffle pattern C3/4s, Raybestos GPZ C2s and either there latest version C1s, or the tried and proven Alto C1s.

Mike and Andrew, working on my post count.:roflmao:


G-Unit You are up late! you're up to 40, better slow it down for the rest of the year
 

gtmax

New member
Apr 9, 2008
54
0
0
The transmission may not care until you start applying big power--it'll let you down with the wrong clutches, no matter if they're set up properly INITALLY. When they shrink, delaminate, just flat fail you'll realize the mistake of just any clutches. You might call my friend Andrew at Suncoast for his advice.
 

Mike L.

Got Sheep?
Staff member
Vendor/Sponsor
Aug 12, 2006
15,681
232
63
Fullerton CA
NFG--Alto reds are better than these. I personally prefer the Suncoast exclusive Raybestos waffle pattern C3/4s, Raybestos GPZ C2s and either there latest version C1s, or the tried and proven Alto C1s.

Mike and Andrew, working on my post count.:roflmao:

George you got a ways to go before you catch Andrew. Haven't heard you flap jaw this much since the old days when you were the secret man.:rofl:
We need you here.:hug::D
 

JoshH

Daggum farm truck
Staff member
Vendor/Sponsor
Feb 14, 2007
13,712
773
113
Texas!!!
I assume the trans does not care what kind of clutches are in each pack as long as they are set up properly? Like if you ran the 16 single sided alto c1s, 7 gpz in the c2, and so on...?

If that's the case, what are the best c3/c4 clutch options?

If you're asking if all the clutch packs have to use the same brand and composition, then no, they don't.
 

skintback

Take this one to church
Mar 5, 2007
919
0
16
Florida
NFG--Alto reds are better than these. I personally prefer the Suncoast exclusive Raybestos waffle pattern C3/4s, Raybestos GPZ C2s and either there latest version C1s, or the tried and proven Alto C1s.

Mike and Andrew, working on my post count.:roflmao:

When did the latest version of raybestos c1's come out?