CCSB 4x4 Wheelie Bars Needed.
- Thread starter coker6365
- Start date
What air and fuel are you running if you dont mind sharing?
Sent from my SM-G930V using Tapatalk
2x10mm pumps, 250 overs both S&S Diesel Motorsport. 472/96 and 5533r with 94mm comp both FI
Sent from my SM-G930W8 using Tapatalk
Nice. I am guessing it's gated around the 472 as well. Cleans up nice for the power it's making.
Sent from my SM-G930V using Tapatalk
No I'm getting before the 72 to atmosphere not to the 94
Sent from my SM-G930W8 using Tapatalk
Gotcha. Hurry up and get that suspension dialed in so we can see it cut a 9! It's definately got the power to do it.
Sent from my SM-G930V using Tapatalk
No I have traction bars right now but I'm going to cut them out and put caltracs. I have double adjustable qa1 shocks vertically mounted on the rear of the axle
Sent from my SM-G930W8 using Tapatalk
https://m.facebook.com/story.php?story_fbid=1599366500108814&id=252916258087185
Sent from my SM-G930W8 using Tapatalk
Sent from my SM-G930W8 using Tapatalk
BRINGING THIS BACK UP . Out of curiosity did this truck ever get dialed in ? If so what kind of times does it run ?
Ended up changing a bunch of the suspension setup, cut out trac bars and installed caltracs, removed pitman and idler braces, installed DHD front diff brace, center link brace, welded in some gussets, pulled the front diff + control arms and put poly bushings in everything ect. Tom at SDS was nice enough to offer his shop up to work in as I don't have one big enough to do that...planning to go to the track once we get some good weather
Sent from my SM-G930W8 using Tapatalk
Sent from my SM-G930W8 using Tapatalk
Wow that’s a lot of changes for sure . Wish you the best of luck and can’t wait to see videos of your next runs . Hope it gets in the 9s with some good straight launches and runs . Are you doing anything to pin down the front suspension ?