Cat filter worth it or not
- Thread starter wymax
- Start date
I like the cat filters. I run a water sep and tighter micron secondary in my setup though.
http://www.duramaxdiesels.com/forum/showthread.php?t=33017
Not sure what you mean by cleaning the injectors? Maybe this thread will help?
http://www.duramaxdiesels.com/forum/showthread.php?t=67022
http://www.duramaxdiesels.com/forum/showthread.php?t=33017
Not sure what you mean by cleaning the injectors? Maybe this thread will help?
http://www.duramaxdiesels.com/forum/showthread.php?t=67022
I just did the cat adapter. Its nice but kinda a pain in the @$$. Make sure you remove the check ball and use the cat filter only. I didnt use cats filter and found out that you need a different oring to seal it or it drops head pressure. The filter sticks to the adapter when changeing it and dont pay fot the spacer just get longer bolts and two nuts to fit over the bolts for spacers. Also you cant drain the water from the filter unless you remove the filter.
The 1R-0750 is not a water separator but the 326-1642 is a water separator. There are many models of the water separator CAT has.
That's why you run both. I prefer to let one type of filter do it's thing and the other what it was intended for.
OP, as far as lift pumps go, I have been running a BD flow max for about 5 years with out a hitch. The PPE died at about a year, Dan offered to look at it but I just never sent it in. Personally I think Fuelab Velocity might be the best pump on the market.
I started running the Donaldson P553203 with the nicktane adapter. Never had any issues running the cat filters either.