Is anyone running a carter lift pump if so how are they i can get one for dirt cheap with everything bigger fuel lines and all any info will be appericated
Carter lift pump
- Thread starter duramaxin14
- Start date
So kat you would not reccommend carter what is mcrat running on yalls trucks as far as lift pumps
I will tell you I will never run a Carter again.
We are cheap and run the Eldebrock 1792's. PPE sells them now under their name as they went straight to the manufacturer and have a special seal that works better with the ultra low sulfur fuel.
http://www.pacificp.com/index.php?main_page=product_info&cPath=2_7&products_id=141
You also can't go wrong with the FASS, Kennedy or TTS's pumps.
I don't know
I will see if I can find out for you tomorrow though. When I talk to Dan.
ok thanks kat i talked to mike L today and got a tranny plain set up so i will have it in the next couple months i think i will sell the carter lift pump to one of my buddys or something that dont no nothing about these trucks
Here is some more info on the 1792
http://www.jegs.com/webapp/wcs/stores/servlet/product_10001_10002_83582_-1
http://www.jegs.com/webapp/wcs/stores/servlet/product_10001_10002_83582_-1
The new PPE lift pump with their name on it is not the edelbrock 1792, but an improved design. We recently had a 1792 go bad, and almost leave us stranded on the way home from school. The new lift pump is quiet and a better design. The brand by the way is SX Performance
1st post- $279 on the PPE website, but the extra $80 over the 1792 is worth it, and it is better than the FASS pump at half the price. 2nd Post- No
i'm runnin the ppe lift pump and i love it all though i have to run it all when the engine is in drive or else i doesn't get enough fuel and i get a 2k rpm gov. but thats not problem seeing it is almost soundless unlike them fass pumps..
Ya I had a Fass 150GP/H. Annoyingly loud. It is now my slip tank pump! I went with the Kennedy Diesel and I had to put my hand on it to check and see if it was even running!! Also they are a centrifigal pump, not positive displacement so when they shit that bed, your CP3 will still draw fuel through them with minimal restriction.