I have a edge insight cts monitor and it only reads up to 22 psi stop there and never spikes over. I am running a 2.8 71 mm turbo s0 i know its boosting way more! Any ideas?
Cant read boost on my lb7 with edge
- Thread starter Dave L Weaver
- Start date
The stock sensor only reads so high. your going to need a mechanical gauge to read higher boost levels
37 - 14.7 (atmospheric) = 22 boost.
Not sure if that's significant, but it might be.
But more to the point, if the device is reading the ECM, then it's restricted by what the ECM will report. Not sure at the "cap" point on LB7's but I do know that the LLY's are capped by the ECM at about 30 PSI IIRC.
Not sure if that's significant, but it might be.
But more to the point, if the device is reading the ECM, then it's restricted by what the ECM will report. Not sure at the "cap" point on LB7's but I do know that the LLY's are capped by the ECM at about 30 PSI IIRC.
Do you have a lb7 ? If you don't that's why.
On edit I see you have a lbz so that's why the lb7 only reads 22 or 23.
Yea that would make sense that the stock sensor would only read to 22 psi. Wonder if i could get after market sensor that reads higher?
