Can't find a belt for my dual fuel setup!!

[Chevy1925]

yes, i have the stubby oil fill (its a van oil fill IIRC) but it all came in my kit

looking at Damians pic, his runs under the oil fill but like i said, its the same part number as im running

 

[DBUSHLB7]

Hope this helps...I'm new to 2CP3 kits. I've never even seen mine in person lol.

Stock oil fill tube

 

[S Phinney]

Same belt number as listed above. You need to change belt path and eliminate one of the idler pulleys for it to work.

 

[THduramax]

Hope this helps...I'm new to 2CP3 kits. I've never even seen mine in person lol.

Stock oil fill tube

Can u get a pic of what it looks like on pullys. How u routed it? Is that an lly or lbz?

 

[DBUSHLB7]

It's an LB7 and I'm sorry it's in Denver at ATS and I'm not going up there until Friday to pick it up. I can ask for a belt routing diagram if you want

 

[duramaxzak]

Who's kit are you using? Some of the kits you have to relocate one of the idler wheels. Maybe that's why the beltes are coming up short.

 

[05LLYDMAX]

A good NAPA store should have gates catalog

 

[Harbin_22]

Call Wherli and ask him what you need, or buy the stubby oil fill tube

 

[THduramax]

It's an LB7 and I'm sorry it's in Denver at ATS and I'm not going up there until Friday to pick it up. I can ask for a belt routing diagram if you want

A belt diagram would be good.. I got two idler pulleys on it.. Maybe one has to go.. Idk.. A diagram would be nice

 

[Dan@PPE]

how many idlers do you have installed? are they all the same size?

 

[THduramax]

how many idlers do you have installed? are they all the same size?

I have two to the right side if the tensioner and one to the left of the steerin pump Which isnt shown in this pic but is where the polished spot is beside pump

 

[S Phinney]

Here is what my routing looks like.

Sent from my DROID RAZR using Tapatalk 2

 

[Dan@PPE]

Ok I think I found your issue. what is the diameter of each idler?

 

[THduramax]

Uuhh... 2 1/2" maybe.. Not there to measure

 

[x MadMAX DIESEL]

Here is what my routing looks like.

Sent from my DROID RAZR using Tapatalk 2

Why not just get rid of that order pulley by the tensioner and run it like this? That belt is pretty close to the tensioner base though, wonder if it will ever hit like that

 

[THduramax]

I'll try some diff routes when I get home.. Storm went through Louisville... Been workin for 25 hrs so far.. Gotta get them lights on

 

[Dan@PPE]

Well if you can get me the information I can try and help...

 

[THduramax]

Well if you can get me the information I can try and help...

Soon as a can.. Haven't been home since yesterday mornin.. I'll get pics and belt numbers an all.. Got 3 belts to try.. I think the green one is gonna be the ticket.. It's 136" long

 

[S Phinney]

Why not just get rid of that order pulley by the tensioner and run it like this? That belt is pretty close to the tensioner base though, wonder if it will ever hit like that

Running it a few years so far. It will not touch the tensioner.

Sent from my DROID RAZR using Tapatalk 2

 

[Dan@PPE]

Soon as a can.. Haven't been home since yesterday mornin.. I'll get pics and belt numbers an all.. Got 3 belts to try.. I think the green one is gonna be the ticket.. It's 136" long

That is the same belt we use in our kits that does not have the centrifuge, Its just under 136".