Can't find a belt for my dual fuel setup!!

[THduramax]

I need a belt.. Funny how everybody runs dual fuelers yet nobody seems to have a belt.. I need this belt. Needs to be about 133" oc... I'm going under the oil fill like this picture.. Not through it. Thanks

 

[Duramax One]

Here's a listing of all the Gates serpentine belts: http://www.gates.com/oreilly/PDFs/SizeListings.pdf

 

[SmokeShow]

Looks like there is a 133" one listed that is 1-3/32 wide. It doesn't say how many ribs though and I can't remember how wide our belts are.

 

[Chevy1925]

Call Dan at PPE. problem solved

 

[THduramax]

I can call people all day long its them callin back that takes the longest... It's great

 

[whitelmmmax]

Call Dan at PPE. problem solved

X2. Or Henry at creatures of the night.

 

[Chevy1925]

I can call people all day long its them callin back that takes the longest... It's great

ask any of them at PPE, they should easily be able to tell you. Dan has always called me back by the end of the day.

 

[THduramax]

Yeah.. I jus got off the phone with him. I ordered a belt using the part number he gave me.. The belt says its a lot longer than what we want... But it's the exact number he gave me for this application. guess we'll find out in the mornin if it works... Jesus!! Never thought getting a belt would b difficult

 

[Chevy1925]

post the number for future reference if you dont mind. will make it real easy to find then

 

[The Funk]

Tommy they keep me a few on hand in Corydon..:thumb:

 

[THduramax]

Tommy they keep me a few on hand in Corydon..:thumb:

U run the stubby oil fill neck though... I'm routing it around that.. Pretty sure They're diff.. Matt brought one over and tried it and it was 3" too long... The box said it was 136 1/2".. Need one around 133"

 

[THduramax]

Well the part number for the belt I was referenced gates k061490 is way to long.. Special order and 50 bucks down the drain.. Gotta love it... I feel like punchin the f*ck outa something. This belt.... This I what I need!!!! is it that hard Jesus Christ

 

[x MadMAX DIESEL]

Is that for the wherli duel alternator location cp3 kit? Can't you just ask him what belt to use? Or are you doing something fancy normally not done?

 

[S Phinney]

The belt that I use is one that is for the dual alternator setup. I think it us right there around 133" maybe a 1/2 more. The belts cost about 42 bucks.

Sent from my DROID RAZR using Tapatalk 2

 

[THduramax]

The belt that I use is one that is for the dual alternator setup. I think it us right there around 133" maybe a 1/2 more. The belts cost about 42 bucks.

Sent from my DROID RAZR using Tapatalk 2

Part number????

 

[DBUSHLB7]

Here is the Gates PN for an ATS 2CP3 kit. Don't know if this helps or not but I thought of post it anyway. It is a green belt.

KO61360HD

 

[THduramax]

Here is the Gates PN for an ATS 2CP3 kit. Don't know if this helps or not but I thought of post it anyway. It is a green belt.

KO61360HD

Is the second pump over where the second alternator would be??

 

[Chevy1925]

Is the second pump over where the second alternator would be??

bit of info i just found. the first two numbers after "K" stand for how many ribs the belt has. the next numbers that follow tell you the length of the belt

so K061360

06 = 6 ribs

1360 = inner diameter of the belt is 136"

hd = heavy duty (green belt)

 

[Chevy1925]

and from what i can find, what damian posted is the same part number on my dual fueler kit belt (PPE) routed the normal way.

 

[THduramax]

and from what i can find, what damian posted is the same part number on my dual fueler kit belt (PPE) routed the normal way.

U have the stubby oil fill tube?? Cause I dont have that..