Cali lb7

[Bonestock]

What is everyone doing for deleting emissions on a Cali lb7? I am guessing just using non Cali parts. Is there any kits out there to block off the up pipe and deleted the cooler and egr system? Gonna do some injectors on my first Cali lb7. Doesn't look like fun with all the emissions intact. I would like to get rid of them!

 

[DuramaxRamRod]

I used a Profab plate for the up pipe, my own plate for the y-bridge which leaks a little and <2' of 5/8" heater hose to delete it.

 

[Noreaster]

federal up-pipe & y bridge

 

[Bonestock]

Damn it I dont want that labor lol!

 

[dmax02]

A crows foot works good to get the top of the injector lines on Cali lb7s

 

[Bonestock]

A crows foot works good to get the top of the injector lines on Cali lb7s

Egr cooler still has to come off no?

 

[dmax02]

I have done a few and never had to take the cooler out just takes a little time getting the lines to break free.

 

[02greysixer]

It can be done with the cooler in place for sure. Just be patient. Crows foot is your friend for sure.

 

[Awenta]

Delete it and be done!

Sent from my SM-N910V using Tapatalk

 

[Bonestock]

Delete it and be done!

Sent from my SM-N910V using Tapatalk

If it were mine it would get the ybridge and up pipe of a non emissions lb7. Its a friends truck and I am sure he is up for it other than plenty of labor that is not so much fun lol!

 

[onebaddmaxxx]

If you don't want to change the up pipe and worried about the up pipe boots breaking get a profab Lly delete support bracket from Rick. Then just throw a fed y bridge on here. I bought one from a member for about $75

 

[Bonestock]

If you don't want to change the up pipe and worried about the up pipe boots breaking get a profab Lly delete support bracket from Rick. Then just throw a fed y bridge on here. I bought one from a member for about $75

Sounds good I may go this route.