Cab and Chassis Fuel Tank?

clrussell

pro-procrastinator
Sep 23, 2013
5,928
399
83
I'll try to remember to measure one for you in the next few days


Sent from my iPhone using Tapatalk
 

CarolinaHD

Member
Feb 8, 2011
969
6
18
NC
Just went and measured. This includes the plastic shields so the tanks themselves are actually a littler smaller.

Front: 57" long, 10.5" wide, 17.5" tall - 102.0 L / 27.0 gal Rear: 28" wide(inside frame to frame), 21" long, 18" high - 87.0 L / 23.0 gal
 
Last edited:

Kspen90

<<<got turbos?
Jul 14, 2011
1,433
0
36
Burleson, Tx
Just went and measured. This includes the plastic shields so the tanks themselves are actually a littler smaller.

Front: 57" long, 10.5" wide, 17.5" tall - 102.0 L / 27.0 gal Rear: 28" wide(inside frame to frame), 21" long, 18" high - 87.0 L / 23.0 gal

Thanks man. I'll do some measuring when I get back to my shop and see if either of those will work.
 

1SloLMM

Member
Oct 25, 2014
110
0
16
Sioux City, IA
Has anyone ever used one of these instead of the stock tank on the drivers side for the strip? Instead of doing a cell just put one of these in and put a sump on it?
 

clrussell

pro-procrastinator
Sep 23, 2013
5,928
399
83
Has anyone ever used one of these instead of the stock tank on the drivers side for the strip? Instead of doing a cell just put one of these in and put a sump on it?


I don't think they will fit under a completely stock truck without modification. The cab and chassis doesn't have a spare tire crossmember and the frames are different. I'm sure someone could make one work.


Sent from my iPhone using Tapatalk