LB7: built front end mods?

[56taskforce]

When I installed my PISK I found it necessary to cycle the steering full left and right and make small adjustments to ensure there was no binding. Remember stock the attachment points of the center link are a ball socket that is forgiving if the idler and pitman arms travel in a slightly different arc the PISK stops the ball and socket from moving.

 

[Subman]

Had Kryptonite full front end on White Out, Severe 4x4 launches and never had an issue, take about half a city block to turn it around, but for the money I think it's the best on the Market.

 

[DewDewMax]

1.6 60ft on sleeves and a DHD brace!

 

[wilsondiesel]

I had Cognito pisk on stock center link and rare parts tie rods and have launched very hard 16-18 psi and never broke anything on stock turbo! Now I'm running a ppe straight center link and have bad tire wear and saw a big effect on turning radius too.

 

[moneypitt]

Have been running Kryptonite tie rods and DHD brace on the 09 with no issues, I am guessing 400 to 500 boosted launches.

https://youtu.be/ZDYi4hGlwKc

 

[cat_dr.]

I'm having problems with mine leaving. Anything over 10 psi it's all over the place. Running rare parts tie rods and dhd brace. Do have leveling keys let all the way down. Which I think is my issue

 

[superswamper003]

My 04 just had sleeves and it launched straight, even at 12-15 psi.. t-bolts almost all the way out and removed leaf in the rear+2 inch shackles