Building the lmm

[blue09dmaxx]

Got the call time to swap it out get a little break in time then shove new kit in

 

[blue09dmaxx]

Picked up and old motor coming out next week

 

[CarolinaHD]

:woott: make sure and post some pictures

 

[Sackett]

Update?

 

[dmax711]

Update?

Motor is all assembled and is going back in brads truck probably end of this week. Then the fun starts....

 

[blue09dmaxx]

Motor is all assembled and is going back in brads truck probably end of this week. Then the fun starts....

:woot

 

[blue09dmaxx]

Got the two small turblow going to be a fun truck

 

[Hernpj01]

coming along nicely it sounds like. Nice Build

 

[blue09dmaxx]

Ready to see how the turbos perform together

 

[Mile_high]

Got the two small turblow going to be a fun truck

What size?

 

[blue09dmaxx]

What size?

363s fmw

 

[blue09dmaxx]

Little update, motor should be going in truck soon, hit a speed bump with a shop. Also decided since the delay, to change the turbo setup; it will remain a triple setup but a 472 in the valley and 2 363's hopefully going to be a fun truck

 

[CaptPhil]

Nice. It will be fun with those turbos.

 

[blue09dmaxx]

Bumping this up I've been extremely busy as has the person modifying the kit but I should pick it up Saturday and then off to powdercoat (if I can pick a color) hoping to have it running by thanksgiving. I don't ever have time working full time, being a full time student, a dad, and having football season tickets. Wish me luck though guys and hopefully I can get some bigger injectors to really drive those turbos

 

[jliddle]

You using Calico for the coating?

Need a good recommendation for a place to ceramic my manifolds. I know your really close to me. Pretty sure Dustin sends his up to Calico as well.

 

[blue09dmaxx]

You using Calico for the coating?

Need a good recommendation for a place to ceramic my manifolds. I know your really close to me. Pretty sure Dustin sends his up to Calico as well.

I'm in upstate sc and hope someone local will

 

[blue09dmaxx]

This is becoming depressing, starting going through parts and the shop who pulled my motor apparently decided the needed my top cp3 more than I did and replaced it with a crusty muddy worn out lb7 cp3

 

[CarolinaHD]

This is becoming depressing, starting going through parts and the shop who pulled my motor apparently decided the needed my top cp3 more than I did and replaced it with a crusty muddy worn out lb7 cp3

What shop? Need to know who to avoid in this area..

 

[Awenta]

This is becoming depressing, starting going through parts and the shop who pulled my motor apparently decided the needed my top cp3 more than I did and replaced it with a crusty muddy worn out lb7 cp3

Man that's f'd up. Sucks to hear things like this

Sent from my SM-N910V using Tapatalk

 

[blue09dmaxx]

What shop? Need to know who to avoid in this area..

Will pm you