Brake Pedal Creaking?

[SpecAlloys]

Gentlemen,
My brake pedal has been making this "door opening" creaking noise when pressed for a couple of weeks now. Sprayed a touch of WD40 up there under the dash which didn't help at all. The noise is definitely coming from the inside.

Any ideas?

 

[BlkMax]

Try something a little more robust like a little bit of lithium grease spray. WD40 is very light and will vaporize off, especially when dealing with pressure.

You might also take a close look, you may have hogged out the holes or worn the pin on the brake pedal...

Good Luck

 

[SpecAlloys]

thanks - could you explain "hogged out the holes" I want to be sure I am looking at all possibilities

 

[paint94979]

Mine has done this for years

 

[BlkMax]

Wear at the pin/brake lever interface.

Maybe it's not an issue...

 

[05LLY duramax]

PB blaster took care of my pedal squeak :thumb:

 

[duramaxsilvy]

wd40 for me, i couldnt get the straw where i wanted to...so i went all out coated it all. truck smelt for a week and the squeak is gone!:woott:

 

[SSchmi5519]

Mine does this when cold


Sent from my iPhone.