Borg Warner S378

[uwyo_dmax]

Any body know anything about one of these, or used one? Would this work well as a single, I figure its better than a s300 but not as big as a s400

http://cgi.ebay.com/ebaymotors/BORG...42795281QQrdZ1QQsspagenameZWDVW#ht_500wt_1214

 

[dmaxvaz]

it is a s300 with big ass wheels in it. this would be nice for a big twin setup (the smaller turbo), and a s510 or would be a nice single charger

 

[uwyo_dmax]

this would be nice for a big twin setup (the smaller turbo), and a s510

Dont I wish

What type of install kit would work with this?

 

[dmaxvaz]

Dont I wish

What type of install kit would work with this?

bullseye sells a t3/4 pedestal, ppe might work

 

[TrentNell]

that has to be typed wrong you cant fit bigger than a 74mm exducer on the turbine on a s300 chassis . and cant go bigger than a 70 or 71 on the compressor , plus s300 is a t-3 ped , must be a s400

 

[uwyo_dmax]

Well heres what i found on the bullseye website...
http://www.bullseyepower.com/catalog.asp

It is an option in the s300 category

 

[TrentNell]

Well heres what i found on the bullseye website...
http://www.bullseyepower.com/catalog.asp

It is an option in the s300 category

huh i have never seen one that big , learn something new every day

 

[dmaxvaz]

that has to be typed wrong you cant fit bigger than a 74mm exducer on the turbine on a s300 chassis . and cant go bigger than a 70 or 71 on the compressor , plus s300 is a t-3 ped , must be a s400

bullseye came out with a racecover for the s400 that will go as big as a 88mm, i bet they probably relesed a s300 based cover that goes up to that 78mm comp wheel. oops, i was typing the same tome as wyo

 

[uwyo_dmax]

huh looks like clear up to 88 in both. Now what does the A/R mean, sorry I'm still really slow on this turbo stuff.

 

[dmaxvaz]

the a/r is what size the snail on the exhaust housing is. the bigger, the slower the spoolup is.

 

[uwyo_dmax]

ahh okay thanks :hug:

 

[fishsmith]

I am running a 66mm bullseye and so far it seems to be doing pretty well

 

[uwyo_dmax]

I am running a 66mm bullseye and so far it seems to be doing pretty well

What did you use for an install kit? Is it still a pretty fast spooling turbo

 

[bullfrogjohnson]

Those are some big wheels on a tiny little shaft. It would spool quicker compared to the s400 version but wouldnt be near as tough to breaking.

 

[DMAXchris]

huh i have never seen one that big , learn something new every day

That's what she said......

 

[Josh2002cc]

I have a t3 install kit I need to sell, PM me if you like.

 

[2500HeavyDuty]

hmmm.....

 

[fishsmith]

I used a bd install kit

 

[skintback]

Why is there so much difference in price in the two sites and are they ETT comp wheels or BB for the price to be that much more?

I was looking at the S400 silver bullet with ETT from Forced Inductions 72mm

 

[uwyo_dmax]

Why is there so much difference in price in the two sites and are they ETT comp wheels or BB for the price to be that much more?

Wondered the same thing myself