LMM: Bolt on roll pan?

[Harbin_22]

When they say "bolt on" roll pans, do they use the factory mounts or their own mount in factory spot or something else?

 

[dbev24]

Mine bolted on the little lip on the user side of the bed. 4 bolts and I was done

 

[JoshH]

Most roll pans use sheet metal screws to mount to the bed unless you weld them in. I've never looked at one on an LMM though.

 

[BLKLMM]

I have a street scene roll pan....it was attached with sheet metal screws

 

[VeeAte]

I have a street scene roll pan....it was attached with sheet metal screws

I call bs, pics!?

 

[THEREDDEVIL]

Same here, not an lmm but attached with like 6 sheet metal screws.

 

[BLKLMM]

I call bs, pics!?

don't have any on me...truck is at my shop...will get some up soon

 

[hondarider552]

Both my pans bolted on with 5 bolts, used like 1/4" x 3/4" and then put sheet metal screws on the sides where the bottom of the fenders meet the bottom of the roll pan or else it will flop back and forth.

 

[sickdiesel]

I have a street scene roll pan....it was attached with sheet metal screws

x2!

 

[RichLMM]

the lmm street scene pans use sheetmetal screws on top but the sides of it 3m double sided tape to it....

 

[Forever]

Let me know what you come up with, I have wanted to roll my bumper for a while.

 

[jmaz268]

my $100 one from LMC truck uses machine screws as well.

 

[TeaBagger2006]

I made a couple holes in my pan and ran some tie wire to keep it from floppin back and forth.... Actually did that today

 

[jmaz268]

on the sides I did one hole and a rivot.

 

[sickdiesel]

on the sides, i just used a right angle drill and self tapping screw.

 

[Harbin_22]

Thanks guys. LMM's are different how they wrap the bedsides. Probably get a cheap one and see what happens

 

[RichLMM]

Thanks guys. LMM's are different how they wrap the bedsides. Probably get a cheap one and see what happens

street scene recently went to a steel pan instead of the plastic...i heard it fits better...

 

[Harbin_22]

Thanks. I really just want one for when I go drag racing I will put it on. Take it back off for everyday use.

 

[RichLMM]

Thanks. I really just want one for when I go drag racing I will put it on. Take it back off for everyday use.

imho just take the bumper off if thats the case...they're a pain to get to fit right and once you get it right you dont wanna remove it

 

[flyinelvis11]

i can't find the pic but over on df there was a rollpan thread and there was a guy with a steel one welded in on a nbs like yours kyle. let me just say, omg! it looked so badass that i filled the cup
http://www.youtube.com/watch?v=ovlp0N7ljFE