I have worn out my tires and i am trying to find out what is the best tire for pulling. How are good year mtr's
best tire for pulling?
- Thread starter 05DMAX1520
- Start date
I have had great luck with BFG A/T or Super Swamper STS just depend on the track. The STS are very soft compound and dont last on the street.
Well with that said, the super swamper sts won't be a good idea only because of cost and as said above they do not last on the street. I would say BFG AT's or a cheaper/softer alternative would be a Pro-Comp AT.
I would not go with the sts then. Most puller chuck there tires when the leading edges of the tread form a small radius. This would happen to the sts's on the street in no time.
My brother in law just put a set of good year mtr's on his gasser and they do really good in the mud has anyone used them for pulling.
I cannot answer your question about the mtr's but I do know that alot of the times you do not want a "aggressive" tread, which is why you see alot of weekend warriors running AT's
I have never seen any mud tire work well pulling. I did use Goodyear Wangler Silent Armour ATs and really liked them for a street driven pulling tire.
These http://www.goodyeartires.com/goodye...ine=Wrangler SilentArmor&mrktarea=Light Truck
The BFG AT work really well as said above.
Mastercraft Couser CTs also seem to work well. http://www.mastercrafttires.com/htm...page=mastercraft_tires_light_truck_courser_CT
A mud tire that is about completely worn out or just a very little trend left will do alright. If you have some of them lying around i would try them first.
It seems as though with a BFG at you'll be right 80% of the time. That is what I'm going to run this year as a driving/pulling tire. Around here the sts work good but should only see track use my 2 cents
a 3.0 dodge around here runs those dick cepek FCII's and he does very well with them.
Last edited:
