Best leveling solution

[Jetty LBZ]

Hey everyone im planing on leveling my truck and wanted to know how others have went about leveling theres. Im leaning towards the Cognito UCA kit. Any advice on this?

 

[Chevy1925]

Hey everyone im planing on leveling my truck and wanted to know how others have went about leveling theres. Im leaning towards the Cognito UCA kit. Any advice on this?

thats about the best way to go about it. will give you factory ride and level the truck out

 

[Jetty LBZ]

Iv looked around a little and the cheapest place I can find them is on NorCal.com. I was planing on putting a slight rake bake in it. Would 2" blocks be ok or would my rear end sway alot with them?

 

[Chevy1925]

Iv looked around a little and the cheapest place I can find them is on NorCal.com. I was planing on putting a slight rake bake in it. Would 2" blocks be ok or would my rear end sway alot with them?

Yeah, Nick usually has some really good prices plus great customer service to go with.

Not sure how the blocks could cause you sway but no, they wont cause you sway

 

[Jetty LBZ]

I read somewhere that if yo got tall blocks that it wasnt safe and your tuck would sway during sharp turns.

 

[Redbowties88]

drop shackles...

 

[Jetty LBZ]

that would do the trick but i was wanting to raise my truck without a lift kit and i still need to be able to hook up a cattle trailer.

 

[CumminStrokeThisDURAMAX]

go under and the one bolt on the torsion key start tighting it do it to both sides and that will level your truck, thats what i did to mine just make sure you get them both the same otherwise it will pull to a side

 

[Jetty LBZ]

i would but doing that would make my shocks drop out early and plus its ruff on the UCAs.iv decided to go with the Cognito leveling kit cause it corrects the joint angle on the UCAs but il have to wait until schools out so i can start working agin and make some money.

 

[jzts0214]

I have 2 inch blocks in the rear with the cognito leveling kit. I bought torsion keys and the blocks separate so i could go a little more then 2 inch. I sit almost level with 2 inch blocks in the back. I just put twins on and I am thinking about taking all that stuff off. If you want it make me an offer. it has just over 10000 miles on it.

 

[Jetty LBZ]

i wish i could give you an offer but i just started back to school and my money is all tied up right now. if i could scrounge together some doe in 2 or 3 weeks what would you want for it? i dont think il need the keys though

 

[jzts0214]

r u wanting the shock extenders or are you going to replace your shocks?

 

[Jetty LBZ]

id need the shock extenders with it. are you wanting to keep your pitman/idler brace?

 

[jzts0214]

Yes I just want to get rid of the upper control arms, blocks and torsion keys and extenders. I will keep the shocks and the idler and pitman arm braces.

 

[Jetty LBZ]

would $375 be enough? i dont mean 2 low ball ya if i am.

 

[jzts0214]

Let me think about it.

 

[Jetty LBZ]

ok well just send me an email when you decide what you want to do its [email protected] sorry if its not on the forum yet

 

[jheyob]

drop shackles...

X2...

 

[jzts0214]

X3...thats what I wanna do so i can 4 wheel launch.