belltech 6403 vs DJM shackles

[LLYDMAX13]

Anyone know the eye to eye measurements of these 2 shackles. From my understanding they should both lower about the same amount? Thanks

 

[1SloLMM]

Should all be inch increments. First ones always stock height, so 4 holes would be 3 inches lower

 

[OregonDMAX]

The shackle is advertised at 2" or 3" but you are only going to get half that amount of drop. Geometry of the axle will only allow half the drop unless you lower the front spring eye also.

Being that you will still get around the desired drop you wantwith a 3" shackle

 

[LLYDMAX13]

I want to know the measurements of the 2 different shackles