bd pedastal options?

[rushingbc]

I had a BD S300, for those that dont know I went to much to quickly and built a tune that got to hot. I dont even know how hot because I didnt do enough testing prior to putting it on the dyno in Alabama. End game it went pop. Lesson learned. I have about 5k on the truck since then with the stock turbo/tune, then race tunes and about 30 1/4 passes so i dont think anything is hurt.

So, now I have a BD pedastal and the stuff from the kit and need a turbo and downpipe to try to start over again. What will fit on the pedastal I have?

 

[Kat]

I know HTT for sure since they use them in their kit.

 

[sweetdiesel]

I know HTT for sure since they use them in their kit.

Correct
You have a T3 flange pedistall.

You can get a HTT or any other t3 flanged turbo

You can either buy a new pedistall or by a T3 to T4 crossover flange for fairly cheap.


If you need a down pipe you could make on or buy one from one of the vendors on here

 

[bigbird]

Any of the Industrial Injection silver series will work, other than the 71.

 

[rushingbc]

thanks ya'll. I'm going to keep trucking with the stocker and a tow tune for a little while.....eating tuna and top ramen....

hopefully after I get back from Sgt's course I'll have the money floating around for another turbo.

 

[MAXLLY]

You might ask Mike from this site, PM him, he liked that size ped and did alot of swapping with it.

Good luck.

 

[bullfrogjohnson]

Htt and A5K!!!!