Battery not charging appearing on my dash?

[Summitsmoke403]

Okay here's what's going on.

I just swapped the banjo washers on my lb7's return line and I just got it back together. I think I hooked the wire that is on the back of the alternator up to the wrong spot. I have it hooked up to the glow plug module now, where I thought it should be. Please correct me If I am wrong


04 Lb7 cc/SB new guy to the forum

 

[Evan@InglewoodTrans]

The wire should go from the back of the alternator to the red box where both battery + are.

 

[Poltergeist]

Moved to Hard Parts.

 

[Summitsmoke403]

Yea I just did that, fixed the bag not charging sign but still has a check engine light and idles at 1000


04 Lb7 cc/SB new guy to the forum

 

[03BlkMax]

ECT sensor plugged in?

Galaxy S3

 

[Summitsmoke403]

Not showing anything on the dash either


04 Lb7 cc/SB new guy to the forum

 

[Summitsmoke403]

Fixed it


04 Lb7 cc/SB new guy to the forum

 

[Evan@InglewoodTrans]

What did you fix?

 

[Summitsmoke403]

My dumbass left the ect sensor unplugged! Thanks guys! Again y'all to the rescue saving me hours of scratching my head!


04 Lb7 cc/SB new guy to the forum

 

[Summitsmoke403]

Any ideas as to why my ac doesn't turn on now? And yes it's plugged in


04 Lb7 cc/SB new guy to the forum

 

[Summitsmoke403]

I checked all the fuses and they are all good eery thing is plugged in, also the heater only blows out of the dash, no defroster or floor heat and when I move the temp control from hot to cold I don't get any difference, the only thing that works is my 1-5 blower control switch


04 Lb7 cc/SB new guy to the forum

 

[MACKIN]

Do you have climate control?

 

[Chevy1925]

do a HVAC relearn and it should fix the issue.

pop hood and pull HVAC/ECAS fuse
put key in ignition and turn to run for 15 sec then turn the ignition off for 30 sec making sure you dont touch anything
put the fuse back in and start the truck but DO NOT TOUCH anything on the temp controls, blower motor, or air direction settings for a full minute

that should recal the HVAC and fix your issue or most of it if all is hooked up right lol

 

[Summitsmoke403]

do a HVAC relearn and it should fix the issue.

pop hood and pull HVAC/ECAS fuse
put key in ignition and turn to run for 15 sec then turn the ignition off for 30 sec making sure you dont touch anything
put the fuse back in and start the truck but DO NOT TOUCH anything on the temp controls, blower motor, or air direction settings for a full minute

that should recal the HVAC and fix your issue or most of it if all is hooked up right lol

Will try ASAP, yea I should have everything hooked up properly I double checked everything this morning when I got to work, and it looks like I got everything where it needs to be.


04 Lb7 cc/SB new guy to the forum