Question: Banks Ic pipe work w/s366?

Devon

Devon

broke my curse
May 2, 2010
807
0
0
Hinsdale ma
I have been researching about this hotside pipe lining up ok with the s366, I see some people mod there pipe and add a couple inches to it to fit up, some others use a silicone coupler. Anyone have pictures of there s366 kit with the banks hotside pipe on it? I have a silicone coupler but not sure if it'll be long enough.(3" long). I don't want to have everything on the truck and come to find out my Ic pipe is to short or something. Thanks guys!


Sent from my iPhone using Tapatalk
 
DBUSHLB7

DBUSHLB7

Team DMAX
Mar 9, 2012
2,789
0
0
Albuquerque, NM
Just a guess but 3" prob will not be long enough. I just bought the MBRP I/C pipe from Merchant Auto. I also immediately ordered a PPE coupler that is 5" long. Another member cautioned me that we will need a 4 ply coupler as the 3 ply one supplied is junk and will just blow off. Brian (Hondarider) has the Banks pipe and I know he had to buy a PPE boot as the other kept blowing off. Hope this helps
 
Devon

Devon

broke my curse
May 2, 2010
807
0
0
Hinsdale ma
Ok, I just want to know if all I need is a longer silicone coupler. I am gettig everything coated so I don't want to have a fresh coated pipe then come to find out I have to cut it up and add more pipe on to it! Thank you I will look into the PPE coupler


Sent from my iPhone using Tapatalk
 
adeso

adeso

wait, what?
May 30, 2011
1,569
0
36
Minot, ND
Banks should have sent you one with it, it goes from 3" down to the exit size on the turbo (2 1/2 IIRC)
 
Devon

Devon

broke my curse
May 2, 2010
807
0
0
Hinsdale ma
Oh ok, gotcha! Anyone have any engine bay shots of there banks pipe on there 366?


Sent from my iPhone using Tapatalk
 
jmaz268

jmaz268

Lead from the Front
May 20, 2010
2,895
0
0
41
Springfield IL
This is my II with banks tubes. If yours is a 3" outlet, just buy a piece of 3" coupling, should mate up no issues.

415671_378427438852904_776728716_o.jpg
 
GOB_LLY

GOB_LLY

Less Than Desired
Mar 21, 2010
42
0
0
Archie, Mo
I need to buy the coupler as well lol... I sandblasted my banks tube last night, I'll get it coated and throw it on when I put my 366 on!
 
hondarider552

hondarider552

Getting faster
May 28, 2008
10,627
2
36
34
Arizona
I had a banks on my GMC, and had to add 1" of tube because it was blowing off. did that and put a PPE boot on there and never once a problem.
 
You must log in or register to reply here.
Top Bottom