my fuel gauge is ether full or emty. an changes all the time wile driveing. does this mean my sending unit is bad? or could it be something else?? thanks
bad sending unit??
- Thread starter Lb7KID
- Start date
holly cow that 3 times cheaper than what i thought they would be thank you!!!!!! the ppe pick up tube is gunna cost more than the sending unit!:thumb: thanks
this was about 2 years ago
You have to drop the tank (i'm sure you know that). Make it easy on yourself and try and run most of the fuel out of it before you dig into the job. You might want to try and sifen it out also. Just trying to help.
i would take the bed off before i dropped the tank again...screw that....worst night i ever had working on the truck by far
do you have a part# ? the Orileys by me has morons working there that wont make any effort to look for parts. Oh and the Dealer wanted $305 back 3-4 years ago
Last edited:
I bought a new sending unit from Santa Clarita GMC in Southern California for 160$ about 2 years ago... PM Henry (ripmr666) he will be able to get you the best price possible
Iv seen the repair kits cheap were you get just the sending unit on the side. If you get the whole cup they charge more. I just saw the year of your truckthe bad thing with that year is the wires rust and get a poor ground ontop of the sending unit. I also sell the Ppe intank pickups.
take the bed off, 8 3/4in bolts and 3 allen screws on the filler neck gets it loose and a buddy to help you lift, 20 mins later and the bed is off the truck
I've had the same problem for two years. Always found the part over 300 bucks. Screw that. A nice picture of the gf has covered the light lol 60 bucks would be awesome
was just looking at another thread like this, remembered to look in my phones notes and i found this....pn 89060634
never found out how much it is from my dealer, dont even know if its a valid pn. should be for just the level sensor
never found out how much it is from my dealer, dont even know if its a valid pn. should be for just the level sensor