ATS manifolds?
- Thread starter hondarider552
- Start date
i just put some ATS manifolds and up pipes on a truck. the up pipes are not at all like that. all fit well and work good
Just ran over a pic of these, never seen them before... Wonder if they ever came out?
They ended up using these.
http://www.duramaxdiesels.com/forum/showthread.php?t=27723
How do the three sets (PPE/RDL/ATS) compare in price?
Does the PPE/RDL manifolds expand as they progress towards the rear like the ATS? How big are the flow paths in each?
Do all these bolt up to a stock turbo or stock turbo location?
Does the PPE/RDL manifolds expand as they progress towards the rear like the ATS? How big are the flow paths in each?
Do all these bolt up to a stock turbo or stock turbo location?
I'm going to end up regretting that I didn't get them before my kit was made, now I won't be able to run manifolds unless I buy new piping..
I have a set of these and they look very well made. I haven't installed them yet because I'm still wondering if I should go bigger with my turbos lol!
Nick
Nick
Ive seen both and was veerryy unimpressed with ATS fit and finish...ricks actually look like they will last a while...and as time has proven thus far they have
really tim? I've sold and sell both. The ATS looked and fit very well. We had a set on the white LLY truck up at Scheid. We did however have to smash the DE downpipe quite a bit. We did Ricks, egr delete and the manifolds and up pipes at the same time but EGT's cruising dropped considerably and spool is much quicker. Yes these work with the stock turbos
My buddy had a set on his 2.6 truck... pretty hard running truck, the up pipes blew out so bad the 2nd or 3rd pass they were touching the fire wall, he talked to ATS and they blew him off so he has the stockers on now. You can just feel the up pipes are way too light for high hp...
IIRC rick makes ppe's manifolds just has a different casting for the logo on them
damn now that's some hp..I can't believe ats wouldn't replace them or even look at them to see how they were messed up so they could improve them..
Thanks for the posts, I wasnt sure if ATS had released that as a new setup to remove the bellows or not, figured I'd ask. Im definately interested in them.
If you dig up any info on them Brian please let us know i have plans to buy another set for a twin project in the future