out of no where when i went to start the truck it didnt do squat. i did hear faint clicking. tested everything i could,i was getting juice. next day went back to truck and it started like nothing happened. i load tested each battery and they were "ok". little weak but usable. ended up spending 400 on diehards anyway. so couple weeks later, no start again.
whats happening is it does not want to crank. also another thing when this occurs is the airdog wont come on. see below:
symptoms:
no airdog on key hot (fused in aux hvac-ign)
no crank (clicks and hisses)
all other fuses seem to work when this happens
all lights and such work
does not start with remote start either
so ive got some sorta problem. what im curious is what type of signals are getting sent out from the ignition? are there multiple signals? wondering if just some or one of the signals supposed to be turning on and sending out are not doing their job! has to be a short somewhere.
so as soon as a buddy pulls up with a snap on scan tool, what do you think happens? freaking starts!!!!!! so now im not sure if i pulled out the cts earlier in anticipation of him using the port, or if i pulled it out just before i tried to start it. so now i couldnt really check to see what was or wasnt getting power. now im scared to go on the kentucky trip. im nervous to go anywhere now!
im going to dig under the fuse block and see if anythings corroded under there. also ill clean up the connections at the distribution block. other than that im freakin out of ideas.
when it happens i can just feel the run crank jcase fuse clicking. how the hell do all the fuses work cept the hvac aux-ign(possibly more but havent noticed)
whats happening is it does not want to crank. also another thing when this occurs is the airdog wont come on. see below:
symptoms:
no airdog on key hot (fused in aux hvac-ign)
no crank (clicks and hisses)
all other fuses seem to work when this happens
all lights and such work
does not start with remote start either
so ive got some sorta problem. what im curious is what type of signals are getting sent out from the ignition? are there multiple signals? wondering if just some or one of the signals supposed to be turning on and sending out are not doing their job! has to be a short somewhere.
so as soon as a buddy pulls up with a snap on scan tool, what do you think happens? freaking starts!!!!!! so now im not sure if i pulled out the cts earlier in anticipation of him using the port, or if i pulled it out just before i tried to start it. so now i couldnt really check to see what was or wasnt getting power. now im scared to go on the kentucky trip. im nervous to go anywhere now!
im going to dig under the fuse block and see if anythings corroded under there. also ill clean up the connections at the distribution block. other than that im freakin out of ideas.
when it happens i can just feel the run crank jcase fuse clicking. how the hell do all the fuses work cept the hvac aux-ign(possibly more but havent noticed)