Another Callout thread... Oh LarryJewell!

custom8726

Active member
Feb 25, 2008
2,784
0
36
Upstate N.Y
July 16 East Coast Nationals
Drags, Pulling, Dyno
Numidia, PA

it is a nadm event and bring what you want i have a few tricks up my sleeve, my truck will be full weight cc/sb but mine is lowered 3in and i hope to see high tens also, we will pry both get kicked off the track

Sounds Like a plan, Not sure which truck I will have ready but one of the 2 will have a built motor in it by then..

BTW, This is all your fault Larry for not stepping up :D :hug:
 

ripmf666

Active member
Sep 20, 2006
15,123
14
38
47
Wentzville Mo
This is where my mph went...
483eeda9-3a8d-8c0f.jpg


Boost hit 50 in 5th then dropped to below 40 several weeks prior I had gone 116... don't you worry Henry its just a poor little LLY :D

Sent from my PC36100 using Tapatalk


Thats not a leak this is
manifoldgasket.jpg

uppipe3.jpg
 

LarryJewell

Back with his honey :)
Jan 21, 2007
10,152
0
36
58
San Angelo
Giving up already, Larry? I noticed the new line in your sig :roflmao:
I'll be there, not racing though, still need my truck for a daily driver. I'd be too tempted to turn up the fuel and leave parts scattered, I'm satisfied knowing what the truck is capable of though :D
 

JoshH

Daggum farm truck
Staff member
Vendor/Sponsor
Feb 14, 2007
13,714
776
113
Texas!!!
Oh, c'mon Larry. It'll be fun. I'll turn mine down to a smaller tune if you want to make it more fair. I've got a nice little 2200 uS tune I could use.
 

LarryJewell

Back with his honey :)
Jan 21, 2007
10,152
0
36
58
San Angelo
Oh, c'mon Larry. It'll be fun. I'll turn mine down to a smaller tune if you want to make it more fair. I've got a nice little 2200 uS tune I could use.
with 60 overs thats still a pretty big PW, I dont go about 2700uS anymore on stock injectors.
 

JoshH

Daggum farm truck
Staff member
Vendor/Sponsor
Feb 14, 2007
13,714
776
113
Texas!!!
so then what are you hiding :confused:
An extra drive axle :woott: Seriously though, I'm not hiding anything. Just thought it would be fun to line 'em up. I was just offering to dial it back since you're truck is handicapped... :D I ran a 13.8 at full weight with my 20" wheels on that 2200 uS tune. I figure if I swap wheels and tires and pull the back seats and some other stuff, I might can get a 13.5 out of it.
If no one will race you Josh, I got ya! Stock LBZ vs Stock LBZ:D
Sounds good. I'll line up with you.
 

JoshH

Daggum farm truck
Staff member
Vendor/Sponsor
Feb 14, 2007
13,714
776
113
Texas!!!
I was planning on running in 4wd, but if Larry wants me to run in 2wd, I will. However, if I run in 2wd, I'm not going to be running the little 2200 uS tune. It would certainly take away a little of my edge.
 

LarryJewell

Back with his honey :)
Jan 21, 2007
10,152
0
36
58
San Angelo
An extra drive axle :woott: Seriously though, I'm not hiding anything. Just thought it would be fun to line 'em up. I was just offering to dial it back since you're truck is handicapped... :D I ran a 13.8 at full weight with my 20" wheels on that 2200 uS tune. I figure if I swap wheels and tires and pull the back seats and some other stuff, I might can get a 13.5 out of it.

Sounds good. I'll line up with you.

I ran a 13.1 before the twins and duel fuelers, so where would your edge be? I seriously would love to race my truck some more, but its getting tired as it is and I just dont have the money to throw at the motor right now. It might have one pass left in it or it might go on forever, I just dont know. I do think its pretty cool that its lived over a year now with the twins and duels though :spit: