Another Battery relo question

[Kappa9012]

I now solder my terminals on too. A lot easier than trying to crimp them especially if you don't have a crimper capable of 1/0 terminals. They're also reuseable if you screw up.

 

[JoshH]

How is the block grounded to frame? May be a slow day but from what I recall block is grounded to cab.

I'm interested in hearing this also. Rubber motor and transmission mounts don't ground very well, and I can't think of any other wires that ground the engine to the frame.

 

[Harbin_22]

I'm interested in hearing this also. Rubber motor and transmission mounts don't ground very well, and I can't think of any other wires that ground the engine to the frame.

This is why I ran a ground back up to the engine. Figure it is fool proof that way

 

[Kappa9012]

I didn't see anything grounded to the frame, so I ran one. 1/0 Gauge from the accessory bracket under the alt right to the frame rail.

 

[JoshH]

I didn't see anything grounded to the frame, so I ran one. 1/0 Gauge from the accessory bracket under the alt right to the frame rail.

Why not bolt it to the block where the factory put the battery ground?

 

[Kappa9012]

honestly I don't know where that location is, and this as very easy to get too. not overly obvious either...