Airdog not kicking on...
- Thread starter SparkZ03DMAX
- Start date
If its like a fass pump, then its easy as pie to disassemble. Gerotor is probably gummed up, IMO. It will probably be making a clicking noise similar to a starter if it is.
Welp start tracing wires. Check before and after the fuse and relay.
Also they are a bit short handed right now so just be patient.
Also they are a bit short handed right now so just be patient.
Ok. So you're still not getting power to the pump, but you have it in the fuse box right?
Trace the harness and look for a broken wire. That would also be the reason you're fuse is popping. Did you ever try the cordless battery?
Trace the harness and look for a broken wire. That would also be the reason you're fuse is popping. Did you ever try the cordless battery?
well if there is no power at the pump, they probably wont tell you much more than what we are telling you. You really need to check that relay. if you have power at the fuses and all the power connections are good along with grounds, that realy may have crapped out
I've check the fuses, the relay, and where its grounded. I even took a car battery to it and nothing happened. Idk if the battery was dead or not but I did try everything. The fuses and relay have power but when i check the pump nothing.
so when the relay is clicked "on", power is coming out of terminal 87 correct?
How did you check it? Not sayin i dont believe you but relays can be tricky SOB's sometimes
x2
But if you put power (12v) and ground direct to the pump and it didn't kick on then it's probably no good.
Yup but he also said he had no power at the pump. i wanna atleast get him power to the pump. i agree though
It's prob gonna be a bad relay. If you have power on one side but not the other than that's the problem as far as not getting power to the pump.