Air Dog has worked great up until today. Turned the key over this morning and I didn't hear the motor on the Air Dog turn on. The unit is about a year and a half old. Has anyone had this problem with their Air Dog? Does anyone have any ideas as to what I could check? I have power to the harness on the Air Dog, and not sure what to check next. Maybe the motor burned up, and I need to buy another unit. Thanks in advance for any advise. -LJ
Question: Air Dog motor just stopped running...any input?
- Thread starter LJ06
- Start date
Make sure your ground has not corroded. My FASS did the same thing and it was the ground.
Last edited:
The relays that came with the harness of my AirDog went bad- i cut them out and just wired my pump into a switch. You might check that- GOOD LUCK Steven
Yeah, my FASS corroded up to, they're right in front of the rear tire though, alot of dirt. It melted the fuse holder. I put a new one on and got it all wrapped up out of the elements for the most part. I always turn mine off when i tune it. I just unplug it from under the hood now. Check all the electrical stuff. Blown fuse maybe?
