Air Dog 150 Install?

[maxthis]

Hey guys, I've had my pump for a few weeks now and was waiting to get my truck tuned and my trans done and now it's time to go on with it.

Is it easier to install the draw straw by dropping the tank or taking the bed off? I hope to put it on this weekend I should have plenty of time.

Thanks, Ronnie

 

[Lb7KID]

i took my bed off the truck it really wasnt that bad me my brother and a buddy just pulled it back set it on a saw hours then went to town from there if i ever did it again that would be the only way i would do it for sure good :rofl:

 

[maxthis]

Thanks...That's kind of what I was thinking, what is there 8 bolts? and un-plug the tail light wiring harness' and it's off?...oh I guess un-hook the filler neck to.

 

[Lb7KID]

yea it 6 or 8 damn i wish i could rember then the 3 filler cap bolts and yes the tail lights unplug on the driver side rear i beleave. we didnt even use any air tools all the bolts came out pretty easy. you dont even have to take the bed off all the way just slide it back save a lil time and work ha

 

[408.Luke]

its 8 bed bolts(for the short bed), then like you said 3 filler cap bolts and two connectors for the tail lights. its easy if you have 3+ people or a lift but dropping the tank isnt hard either (two strap bolts and 3 lines to be removed and two connectors, filler line and a ground wire ) ive done both many times they are about the same

 

[Jared Duramax]

i just put one in a ford and i pulled the bed i will always be pulling the bed for now on you can get that tube in there more accuratly with the bed off:thumb:

 

[maxthis]

Sweet..Thanks guys, I will probably just pull the bed...Plus I can do some pressure washing and paint the frame while i'm under there!