Help: Adding sub to factory Bose system

[zrider91r]

@zrider91r, just got done with the install. I actually tapped different wires than what you'd originally said to tap. I was looking at the ones you'd said, but according to research I'd done previously if you tap those wires, the correct levels don't get sent to the amp (low). So I tapped 4 different wires. They were before the amp (that's what research had said to do) and went straight to the stock sub.

Thank you for your response. I think I'm getting too old for these installations lol


Sent from my iPhone using Tapatalk

The ones I tapped were the ones going into the amp from the head unit, not coming out of the amp to the speakers.

Which ones did you end up pulling from?


Sent from my iPhone using Tapatalk

 

[TFD07]

Hey, sorry for the late response. Just realized I hadn't said anything. I didn't get any pics of the harness so I'll try to explain


Sent from my iPhone using Tapatalk

 

[TFD07]

So I pulled the center and under the center was a large connector. I unplugged that connector then with the center out, I was able to see where all the wires went. Coming off the connector (which was originally connected under the center) was a small branch of wires that went to the sub (front of console in my truck) and the rest went to the amp (back of console)... I tapped the ones going to the amp coming from that connector


Sent from my iPhone using Tapatalk

 

[TFD07]

These

Sent from my iPhone using Tapatalk