AD150 on a power stroke 7.3

[coker6303]

I am using an AD150 that I have laying here to replace the stock lift pump on a 7.3 power stroke. They require a min of 55psi at the injection pump inlet. I set the pump at 68psi using a spring from ACE hardware to compensate for the psi drop in the lines and across the stock filter.

Question is, does anyone see any potential problem running this on a daily driver at that psi?

Sent from my ADR6400L using Tapatalk

 

[BlkMax]

AD lists a Ford 7.3 replacement pump set at 50-55 psi in their catalog, but use the DF-165. I would think it would be OK.