Alright fellas I need some help. I’ve got a 2007 classic GMC Sierra 2500hd 4wd SLT.
End of September or beginning of October I completely rebuilt the front end. Hubs, shocks, ball joints, control arms, and brakes. Truck had 150k and started having some creaking and popping in the front end. Being 13 years old I figure those parts paid their penance.
Since the first test drive I’ve had an ABS light (no lights not ever before rebuild) and brake light on. I took it to work the following day and hooked a SNAP-ON scanner to it and it wouldn’t read or detect any ABS codes.
The hubs I regretfully bought from Orileys. I ohm checked my passenger side NEW hub... 477k ohms. Driver side NEW was 6.5M ohm. I don’t know what the old ones were given I threw them into the scrap bin before thinking about it. I know those are far out of spec. Tonight I warrantied them both with two new ones light wouldn’t go out. I haven’t attempted to hook the shops scanner yet but I figured the light would go out once the wheel speed sensor seen speed and voltage but no such luck. Anyone got any advise where to go from here?
End of September or beginning of October I completely rebuilt the front end. Hubs, shocks, ball joints, control arms, and brakes. Truck had 150k and started having some creaking and popping in the front end. Being 13 years old I figure those parts paid their penance.
Since the first test drive I’ve had an ABS light (no lights not ever before rebuild) and brake light on. I took it to work the following day and hooked a SNAP-ON scanner to it and it wouldn’t read or detect any ABS codes.
The hubs I regretfully bought from Orileys. I ohm checked my passenger side NEW hub... 477k ohms. Driver side NEW was 6.5M ohm. I don’t know what the old ones were given I threw them into the scrap bin before thinking about it. I know those are far out of spec. Tonight I warrantied them both with two new ones light wouldn’t go out. I haven’t attempted to hook the shops scanner yet but I figured the light would go out once the wheel speed sensor seen speed and voltage but no such luck. Anyone got any advise where to go from here?