A5k???

[seth999]

I was wondering would it be practical to run an A5K or would I most likely be asking for problems...I'm thinking pretty hard about it...head studs would be going on first :thumb:...anybody have any oppinions on the matter?

 

[paint94979]

There are much better options out there especially when comparing prices... but no doubt the Aurora 5000 is a consistent performer

 

[seth999]

what kinda options are you thinking...im looking for a max around 700 that way i have room to grow but then again it will be adding alot of lag time but i guess thats the trade off for the power

 

[LarryJewell]

you could probably get a set of small Twins and be much better off

Give Trent a shout

 

[paint94979]

what kinda options are you thinking...im looking for a max around 700 that way i have room to grow but then again it will be adding alot of lag time but i guess thats the trade off for the power

an S472 or S475 are great options... not sure the exact power output the S472 is capable of but the S475 will put you over the 800hp mark with the proper setup... FYI I made 643hp with a single CP3 and GT4094 with stock injectors.

 

[seth999]

I would rather have a big single but twins are not outa the picture...if the price is rite adding a big brother to the danville charger would be pretty mean

 

[Akdiesel]

Def a S4xx turbo, easily upgradeable, as Nick said room to grow, and affordable...Cheetahs a great turbo but not upgradeable and a bit limiting HP wise but easy easy install

 

[delong_1]

i had one and imo i dont like not having a gate, once boost hit 50 drive pressure was way over 70 psi. without a gate no way to limit this.

 

[Mike]

i had one and imo i dont like not having a gate, once boost hit 50 drive pressure was way over 70 psi. without a gate no way to limit this.

Did you have the T3 or T4 turbine housing?