Question: 8an fittings, what size hose?
- Thread starter diesel53
- Start date
AN fittings are in 16ths of an inch. 8AN = 8/16 = 1/2", 4AN = 4/16 = 1/4", 10AN = 10/16 = 5/8", etc...
If you're making your own AN lines, you'll need to use the hose made for the specific manufacturer fittings you bought. All AN fittings are not backwards compatible with different manufacturers hoses. What exactly are you trying to do?
An fittings are 1/16" . You cannot interchange fittings and hose. You have to use fittings and hose designed for each other. Even the same brand doesnt always interchange through their series.
As long as those fittings were made for the same series of hoses you bought, you'll be fine.
Push lok style fitting s and hose like that are much different to assemble than AN fittings and braided hose. I wouldnt say they are easier but they take less skill and tools. Keep some warm soapy water close by to soften tge hose so the fittings push in. They are a M-fer. Do not use hose clamps on them.
As long as the hose was designed for that series fittkng you will be fine.
I started using a heat gun on the hose to assist in pushing it on. I don't know if any manufactures will recommend that but it works for me.