I'm curious if anyone has broken into the 7's in the 1/8th with stock turbo and injectors and if so how far?
Sent from my SAMSUNG-SM-G870A using Tapatalk
Sent from my SAMSUNG-SM-G870A using Tapatalk
LLY: 7.xx's stock fuel/air lly possible?
- Thread starter thomasreynolds90
- Start date
That's pretty impressive. I'm trying to keep from using additional power adders though,I'd just bite the bullet and go with a larger charger before I sprayed it. The last few runs I made were 8.4's and I've since put on a centerlink brace,Traction bars and a transfer case brace. I'm hoping that'll shave some time off my 60ft and maybe a little overall once I launch harder.
Sent from my SAMSUNG-SM-G870A using Tapatalk
Sent from my SAMSUNG-SM-G870A using Tapatalk
A 7.99 would be equivalent to about a 12.5-12.6 in the 1/4. Plenty have gone that fast with stock fuel and air.
I also went 11.75 in the van on fuel, but that was some pretty serious weight reduction.
I also went 11.75 in the van on fuel, but that was some pretty serious weight reduction.
Last edited:
Yes. With a tool box and 100lbs or less of stuff in it. 1.75 60ft. Trapped at 85mph if I remember right. Built frontend.
Right on,I'm going to take off roughly 400lb between the tool box,spare and hitches. Realistically that should put me between 8.2 and 8.1 I'd think. I was debating manifolds,up pipes and a batmowheel to help get me there but that would cost almost as much as a turbo lol.
Who's tunes do you have?
Sent from my SAMSUNG-SM-G870A using Tapatalk
Who's tunes do you have?
Sent from my SAMSUNG-SM-G870A using Tapatalk
I weighed before I did any weight reduction, and it was right at 6400 lbs with me in it. After removing everything I did, it was almost 1100 lbs of weight reduction.
http://www.duramaxdiesels.com/forum/showpost.php?p=996132&postcount=182
Didn't look like you had to take to much out of her:cool2:
