Anyone running this setup? Curious as to what can be had numbers wise running an s369sxe/74/.91 over s484/1.32/96 I'm hoping for 4 digits when the motor is done. Think it's possible?
69/484
- Thread starter D1rty-max
- Start date
I have 200% overs sitting in the box
I'm just hoping these chargers can make over 4 digits fuel only
Last edited:
I have a 1.0 housing for it iv thought about running I don't want this damn 69 holding me back. I'm hoping if I can get Kory to play with the tuning it will not be too smoky and still make well within 4 digits, if that's possible Lol
Last edited:
I am running a similar setup. Hasn't been on the dyno yet but I have no doubts it is north of 1K. Im running a 371 and a 485 with 250s
Both chargers were built by FI the 371 was a base 369 SXE and he put a 71mm wheel in it
your 480 (if box stock) will be the limiter. you will have to drive these turbos pretty hard to get a track proven 1000rwhp, that requires a good bit of drive pressure which requires a good bit of fuel which can not be all burnt with with those turbos and still net 1000rwhp. so less smoke means either bigger turbos or less power. you can probably get a pretty damn clean 700-800rwhp from that setup and those injectors.
I ran a 11.1@123 on a stock modded charger in the valley, box 80 over the top, 100 overs, 2xcp3s, on a 1975uS tune. Truck weighed 6750 with me in it, wasn't out of air yet at 3750ft.
I'm hoping the extra airflow gets me there. Really don't want to push these things too hard