657hp 1089T With a IHI

[dmax02]

Finally got a chance to dyno my truck with the new turbo and 60 overs. Im very happy with the numbers, stock head bolts still holding strong :thumb:

 

[juddski88]

nice man:thumb:

 

[dmax02]

Thanks Tim will be calling when my trans finally gives up shouldn't be long.

 

[duramaxzak]

Is that with the billet or cast 66 IHI?

 

[dmax02]

Its billet I dont think rcd makes a cast IHI.

 

[duramaxzak]

Its billet I dont think rcd makes a cast IHI.

Didn't you have a DTS 66 IHI?

I know somebody with a DTS 66/74 billet IHI with similar set-up.

 

[dmax02]

yea i ended up selling it.

 

[dmax02]

I would have went with the DTS 66/74 but they were a few weeks out, RCD had one ready to ship.

 

[doug9940]

Whose tunes are you running?

 

[dmax02]

The 657 run was marks at Danville

 

[doug9940]

The 657 run was marks at Danville

Cool. He's definitely one of the better tuners. Was that a max effort or is there still some room left in it?

 

[dmax02]

yes that was my race tune, Im not sure how much more the stock motor can take and don't want to find out

 

[doug9940]

yes that was my race tune, Im not sure how much more the stock motor can take and don't want to find out

Wow! That was on a stock bottom end? I'm gonna agree with you. You don't want to push too far and find the limits of OEM parts. You pushed it further than what I personally would be comfortable with. Again, those are pretty nice numbers.:thumb:

 

[coker6303]

Very nice!! That's a solid number for a stock motor!! :thumb:

what was the correction factor?

 

[dmax02]

Good ol lb7 with 170k still hanging in there :woott:
Im not sure about the correction.

 

[RickDLance]

Congrats!!! :woott:

 

[dmax02]

Thanks rick! , New gaskets are holding good:thumb:

 

[Noreaster]

Nice! thats alot better than the fall dyno day in NH

 

[MarkBroviak]

Congrats Zach! Yes, there is plenty more to go in the tuning but he's already far past what his motor is going to want to hold for an extended period of time loaded!

 

[coalroller83]

That's a solid run! I'm running the same charger, with 30% nozzles... 666hp, 1287 tq.