Help: 60% over injectors

[cafryer]

How many lpm are 60 overs

 

[MaxPowerLB7]

I would guess around 32 liters. 60 overs should be good for around 1400ish depending on how brave you are with pulsewidth.

 

[cafryer]

well im only shooting for high 800s or low 900s

 

[DIESELMAFIAPER.LB7]

Mid-lower 10s have been done on 45% overs too fyi

Mine might be hitting the road soon with all new injectors with them ill let u have first dibs if this other deal goes threw :hug:

OT yes 60% overs are fine for the street especially with twins you should be able to keep the smoke down an have a very fast truck

 

[cafryer]

Will my 150gph lift pump be enough for these and duel 42% pumps

 

[MaxPowerLB7]

You'll likely want to upgrade your pump, a 150 will have a tough time keeping up.

 

[cafryer]

Thats what i was thinking.

 

[cafryer]

What size do you think would work

 

[Colt]

How are the Cognito, Xfer case brace, and Caltracs helping you? I have done these and the truck pulls out hard and straight as hell. Caltracs do ride a bit stiff but sure made it pull out of the hole so much better!!!!!

 

[Chevy1925]

Mine might be hitting the road soon with all new injectors with them ill let u have first dibs if this other deal goes threw :hug:

OT yes 60% overs are fine for the street especially with twins you should be able to keep the smoke down an have a very fast truck

Shoot me a PM Jake, i think i can do that

 

[cafryer]

How are the Cognito, Xfer case brace, and Caltracs helping you? I have done these and the truck pulls out hard and straight as hell. Caltracs do ride a bit stiff but sure made it pull out of the hole so much better!!!!!

They where all worth while really pleased.

 

[LBZ]

What size do you think would work

I'd run this guy with one of their regulators and inline filter: http://fuelab.com/prodigy-fuel-pumps/40402-reduced-size-carbureted-in-line-fuel-pump

Or the 41403 if you plan on turning it up more down the road.

About $600 plus the plumbing but IMO these pumps are some of the best out there.

Nice looking truck by the way!:thumb:

 

[cafryer]

Thanks for the compliment.Its nice to here them when you put so much work into them.

 

[paint94979]

For ease of install I would look to a FASS 220 or 260. I agree nice looking truck.

 

[sickdiesel]

60s are def streetable but also 45s can get u where u wanna go too

 

[LBZ]

For ease of install I would look to a FASS 220 or 260. I agree nice looking truck.

Not surprised to see this comment from you there Mr. 3 day turbo swap!!:roflmao:

 

[Burn Down]

I'd run this guy with one of their regulators and inline filter: http://fuelab.com/prodigy-fuel-pumps/40402-reduced-size-carbureted-in-line-fuel-pump

Or the 41403 if you plan on turning it up more down the road.

About $600 plus the plumbing but IMO these pumps are some of the best out there.

Nice looking truck by the way!:thumb:

How noisy are these? Compared to say a PPE?

 

[LBZ]

A little bit louder but not bad. It's on par for most of the pumps out there - quieter than the FASS 150 that I had at one time that's for sure!

 

[Burn Down]

I got a smoking good deal on the PPE but when it dies the Fuellab is replacing it.